56K CROSSOVER CABLE

Click here for crossover  here for rollover cables here for a T1 Crossover cable or here for Loop-back Plugs.

                                                                                                                         Need a 56K Loop-back Plug?  darthgarlicatyahoodotcom  I will make one for you for $5  you are responsible for shipping

When you are through making a 56K crossover cable,

it the ends should look like this.

The outer insulation 5 should go past and be crimped by the holder 1.

The cable pair copper ends should be visible at the end of the crimp 4.

After crimping the tines 2 should be flush flat with the bottom of the crimp.

* The separate insulated wires 3 should go all the way to the end of the crimp 4.

Patch cables should never be more than 25 feet long.

Never run patch cables on the floor where they will be stepped on or run

over by office furniture or chairs.